Chromium carbide sample sampling device
Release time:
2021-10-13 16:47
Source:
At present, many companies usually use manual sampling in the sampling inspection process of chromium carbide production, but at present, the method of manual sampling is generally used in the inspection and sampling process of titanium carbide production in China, which is time-consuming and laborious, and has low work efficiency. At the same time, it increases the labor intensity of the staff, may cause waste of sample sampling, and is not easy to control and adjust the sampling level and depth. Therefore, there is a need for a chromium carbide sample sampling device.
Technical points: In view of the shortcomings of the existing technology, our technicians provide a chromium carbide sample sampling device, which solves the technical problems of time-consuming and laborious manual sampling and low work efficiency in the process of titanium carbide production inspection and sampling. In order to achieve the above purpose, the chromium carbide sample sampling device adopts the following technical scheme: a chromium carbide sample sampling device includes a sampling tube, the tube wall of the sampling tube is provided with a transparent observation window, one side of the observation window is provided with a scale, a push-pull rod is installed in the sampling tube, one end of the push-pull rod is provided with a connecting plate and a sampling tube, and the push-pull rod is fixedly connected with the sampling tube through the top of the sampling tube. The push-pull rod is fixedly connected with an electric telescopic device through a connecting block; the second electric telescopic device includes two motors, two lifting buttons and two electric telescopic rods; the bottom of the sample injection tube is provided with a through hole. The electric telescopic device comprises a motor, a lifting button and an electric telescopic rod, the push-pull rod is fixedly connected with the electric telescopic rod through a connecting block; the bottom of the electric telescopic device is provided with a leg. An adjusting nut is movably installed on the outer surface of the bottom of the support leg. Includes a shock pad with a detachable connection to the bottom of the support leg. The outer surface of the injection tube is provided with a smooth layer, and the width of the connecting plate is greater than the width of the sampling tube.
In summary, the above-mentioned chromium carbide sample sampling device has the following beneficial effects: the chromium carbide sample sampling device realizes the automation of chromium carbide production inspection and sampling by adopting the design of two electric telescopic rods and push-pull rods, saves time and effort, and improves work efficiency; the through hole is convenient for the sample injection tube to sample the chromium carbide sample. The second electric telescopic device controls the push-pull rod to move up and down, realizes the automatic sampling of chromium carbide samples, is simple to operate, and improves work efficiency; the support leg of the chromium carbide sample sampling device is used to support the second electric telescopic device. The adjusting nut can adjust the leg, which enhances the flexibility of the equipment. The design of the anti-vibration pad makes the equipment work more smoothly; the smooth layer of a chromium carbide sample sampling device prevents the injection tube from taking out a little chromium carbide sample from the sample, resulting in a waste of resources. The width of the connecting plate is greater than the width of the sampling tube to prevent the observation window on the connecting plate from being covered by the collected samples, thereby affecting the observation effect.
Chromium carbide
Next Page
Company address: 412007, No. 86, Tomorrow Road, Liyu Industrial Park, Tianyuan District, Zhuzhou City, Hunan Province
This website already supports IPV4 / IPV6 bidirectional access